http://www.tracopower.com page 1 of 6 industrial power supplies tsp-3p series, 240 C960 watt features 200% peak power! 3-phase input 3ac 400v or 3ac 500v 200 % boost power for up to 5 seconds alternative to ac transformers fully regulated 24 vdc output with 10 a, 20 a or 40 a rugged metal case design qualifed for harsh industrial environment high effciency >92% operating temperature range: C25c to +60c (full power) overload and over temperature protection industrial safety approvals cost effective design 3-year product warranty the tracopower tsp-3p series of high performance din-rail power supplies of - fers an economical solution to generate a regulated dc voltage from three-phase mains networks. the smart design achieves a very high effciency at ultra compact size and very competitive cost. the series provides models with 240, 480 and 960 watt output power all with additional power reserve of up to 200%. this high peak power guarantees a reliable start-up of loads with high inrush cur - rents such as motors, valves and other industrial loads. in many applications these switching power supplies can also replace mains transformers with rectifers. order code output power (nom.) input voltage (nom.) output voltage (nom.) *output current (nom.) tsp 240-124-3pac400 240 w 3 ac 400 v 24 vdc 10 a tsp 240-124-3pac500 3 ac 500 v 24 vdc 10 a tsp 480-124-3pac400 480 w 3 ac 400 v 24 vdc 20 a tsp 480-124-3pac500 3 ac 500 v 24 vdc 20 a tsp 960-124-3pac400 960 w 3 ac 400 v 24 vdc 40 a tsp 960-124-3pac500 3 ac 500 v 24 vdc 40 a models * 200% peak current for up to 5 sec. cb scheme emc lvd iec 60950-1 u l 60950 -1 ul 508 atex ii3g iecex en 60950 -1 en 61558-2-16 en 60204
http://www.tracopower.com page 2 of 6 industrial power supplies tsp-3p series 240C960 watt input specifications input voltage range star-net configuration (2-phase operation not possible) 400 vac models: 320 C 440 vac 500 vac models: 400 C 550 vac (derating below 410 vac see graph 2) input voltage frequency 47 C 63 hz harmonic limits en 61000-3-2, class b (for <16 a per phase) power factor >0.8 at full load recommended circuit breaker, 6.0 a characteristic b output specifications output voltage: 24 vdc (fixed) regulation C input / load variation 1 % max. + voltage drop at low input voltage and/or boost power, see graph 1 & 2 boost power C max. current 200 % of nominal output current C duty cycle <10 % C max. cycle time 5 sec limited by timer (automatic restart after 30 sec.) C input voltage requirements see graph 1 & 2 ripple and noise C nominal operation 100 mv pk-pk typ. (20mhz bandwidth) C boost power operation up to 750 mv pk-pk rise time 200 ms typ. current limitation at 230 % of nominal output current, constant current overvoltage protection 33 v typ. overtemperature protection switch off at overtemperature (automatic restart) power back immunity 35 vdc continuouse, 40 vdc for one second 320 330 340 350 360 370 430 440 24 23 22 21 25 400 410 420 430 450 460 540 550 24 23 22 21 25 50% load 100% load 100% load 100% load 100% load 200% boost 200% boost graph 1: 400 v ac input models v acin v acin vdcout vdcout graph 2: 500 v ac input models general specifications temperature range C full power operation C25c to +60c C max. operating +70c, 2.5 %/k derating above +60c C start up C40c C in accordance to ul508 C25c to +40c cooling convection cooling, no internal fan humidity (non condensing) 95 % rel. h max. reliability, calculated mtbf at +25c acc. to iec 61709 C tsp 240 & 480 >1 mio h C tsp 960 >800000 h isolation according to iec/en 60950-1, ul 60950-1, ul 508 class of protection safety class i (iec 536) degree of protection ip 20 ( iec/en 60529) output power derating
http://www.tracopower.com page 3 of 6 industrial power supplies tsp-3p series 240C960 watt general specifications electromagnetic compatibility (emc), emissions en 61000-6-3 C conducted ri suppression on input en 55011 class b, en 55022 class b, C radiated ri suppression en 55011 class b, en 55022 class b, electromagnetic compatibility (emc), immunity en 61000-6-2 C electrostatic discharge (esd) iec/en 61000-4-2 8 kv / 15 kv criteria tba C radiated rf field immunity iec/en 61000-4-3 10 v/m criteria tba C electrical fast transient burst immunity input iec/en 61000-4-4 4 kv criteria tba burst immunity output iec/en 61000-4-4 2 kv criteria tba C surge immunity l C l iec/en 61000-4-5 2 kv criteria tba l C pe iec/en 61000-4-5 4 kv criteria tba + output C - output iec/en 61000-4-5 0.5 kv criteria tba + output C pe iec/en 61000-4-5 0.5 kv criteria tba C output C pe iec/en 61000-4-5 0.5 kv criteria tba C immunity to conducted rf disturbances iec/en 61000-4-6 10 v criteria tba C mains voltage dips and interruptions iec/en 61000-4-11 safety standards C information technology equipment iec/en 60950-1, ul 60950-1 C industrial control equipment ul 508 listed, csa c22.2 no. 107.1 C equipment for use in explosive atmospheres iec 60079-0, iec 60079-15, atex 94/9/ec C electrical equipment for machines en 60204 C electronic equipment for power installations en 5 0178 C safety of power transformers en 61558-2-16 safety approvals and C cb report for iec 60950-1 www.tracopower.com/products/tsp3p-cb.pdf C siq certificate for en 60950-1 www.tracopower.com/products/tsp3p-siq.pdf C iecex test report for iec 60079-15 www.tracopower.com/products/tsp3p-iecex.pdf C ii3g ex na nc llc t3 www.tracopower.com/products/tsp3p-atex.pdf C ul approvals for ul 508 listed www.tracopower.com/products/tsp3p-ul508.pdf C curtis-straus certificate for ul 60950-1 (2nd) www.tracopower.com/products/tsp3p-ul.pdf C bureau veritas for other standards www.tracopower.com/products/tsp3p-bv.pdf environmental compliance C reach www.tracopower.com/products/tsp3p-reach.pdf C rohs rohs directive 2002/95/ec environment C vibration acc. iec 60068-2-6; 0.075 mm / 10 C 55 hz, C shock acc. iec 60068-2-27 11ms / 15 g status signals C dc-ok relay contact dc ok = contact closed at >20...22 vdc rated: 30 vdc/1.0 a for 24 vdc models C dc-ok indication green led at >20...22 vdc C phase error indication red blinking led if one or two phases are missing (function only if earth is connected) C overload / overtemperature red led on at >100% nominal load (5 sec. count down for boost power is activated) red blinking led at temperature shut down (manual restart required - mains disconnect for 5 sec.) C automatic restart indication red blinking led during overload recovery periode enclosure material aluminium (chassis) / stainless steel (cover) mounting C din-rail mounting for din-rails as per en 50022-35x15/7.5 (snap-on with self-locking spring) C wall mounting (option) with wall mounting bracket - see page 6 connection screw terminals installation instructions www.tracopower.com/products/tsp3p-inst.pdf all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
http://www.tracopower.com page 4 of 6 industrial power supplies tsp-3p series 240C960 watt 240 watt models outline dimensions 54.0 110.0 (2.13) (4.33) 110.0 (4.33) 25.0 (0.98) 5.0 (0.20) 14.5 (0.57) dc-on dc-ok l1 38.5 (1.52) 80.0 (3.15) _ + over-load rest ar t phase f aul t l2 l3 480 watt models 80.0 125.0 (3.15) (4.92) 125.0 (4.92) 45.0 (1.77) 86.5 (3.41) (1.81) 5.0 (0.20) 25.0 (0.98) 25.0 (0.98) 46.0 17.0 (0.67) dc-ok dc-on over-load rest ar t phase f aul t _ + _ + l1 l2 l3 weight: 1.05 kg (2.31 lb) weight: 55 g (1.2 lb) dimensions in mm, ( ) inch tolerances: 0.5 mm (0.02)
http://www.tracopower.com page 5 of 6 outline dimensions 960 watt models dimensions in [mm], ( ) = inch tolerances: 0.5 mm (0.02) weight: 2.35 kg (5.19 lb) industrial power supplies tsp-3p series 240C960 watt 165.0 125.0 (6.50) (4.92) 125.0 (4.92) 25.0 (0.98) 25.0 (0.98) 123.0 (4.84) 21.0 (0.83) 45.0 (1.77) 86.5 (3.41) dc-ok dc-on over-load rest ar t phase f aul t _ + _ + l1 l2 l3
page 6 of 6 order code for models content of kit tsp-wmk03 tsp-wmk02 240 w 480 w & 960 w 1 bracket 2 brackets tspCwmk wall mounting bracket re v. 03/12 specifcations can be changed any time without notice. industrial power supplies tsp-3p series 240C960 watt 62.5 (2.46) 173.0 (6.81) tsp 480-124-3p ac400 tsp 480-124-3p ac500 tsp 960-124-3p ac400 tsp 960-124-3p ac500 tsp 240-124-3p ac400 tsp 240-124-3p ac500 dimensions: [mm] ( ) = inch 46.0 (1.81) 33.0 (1.30) 25 (0.98) 50.0 (1.97) 2x ? 4.3 (0.17) 4 x positioning holes 2.0 (0.08) material: 2 mm mild steel t olerance: 0.1mm ( 0.004) 62.5 (2.46) 96.0 (3.78) 2.0 (0.08) 30.0 (1.18) 15.0 (0.59) ? 4.3 (0.17) 7.0 (0.28) 15.0 (0.59) 7.0 (0.28) 15.0 (0.59) material: 2 mm mild steel t olerance: 0.1mm ( 0.004) 55.0 (2.16) ? 4.25 (0.17) 2.0 (0.08) 2.0 (0.08) r 2.12 (0.083) r 2.12 (0.083) 85.0 (3.35) 42.5 (1.67) 34.5 (1.36) 34.5 (1.36) 74.0 (2.91) 37.0 (1.45) 25.0 (0.98) 25.0 (0.98) 4 x positioning holes 2.0 (0.08) 2.0 (0.08) r 2.12 (0.083) r 2.12 (0.083) ? 4.25 (0.17) ? 4.25 (0.17) tsp-wmk03 tsp-wmk02 jenatschstrasse 1 ch-8002 zurich switzerland t el. +41 43 311 45 11 fax +41 43 311 45 45 info@traco.ch www .tracopower .com
|
